auto lamp plug-in fuses /A158

Fuse inspection and replacement
In the course of using the automobile, if the electrical equipment does not work, it may be caused by the burn of the fuse and need to be replaced in time.
The method is: 1. Turn off the ignition switch and open the fuse box cover. 2. Replace the fuse.
Matters needing attention:
(1) the fuse should be replaced according to the rated current value specified on the fuse box lid, instead of using a fuse higher than the rated current.
(2) if the new fuse is blown immediately, it is indicated that the circuit system may be defective and should be repaired as soon as possible.
(3) in the absence of a spare fuse. In case of emergency, the fuse on other equipment that has no influence on driving and safety can be replaced.
(4) if a fuse with the same current load can not be found, a lower rated current than the original fuse can be adopted.

Plug-in fuses are designed to be inserted into the fuse box. Fuse is small safety part in an electrical device or piece of machinery that causes it to stop working if the electric current is too high, and so prevents fires or other dangers.

Contact us if you need more details on Auto Lamp Plug-in Fuses. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Plug-in Fuses for Car、Auto Plug-in Fuses for Auto. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Auto Fuses > Auto Plug-in Fuses